总裁俱乐部app

OBD Codes
Your OBD-II Trouble Codes Repair Site

P20DF Exhaust Aftertreatment Fuel Pressure Sensor Circuit Low

OBD-II Trouble Code Technical Description

Article by
Stephen Darby
Stephen Darby
ASE Certified Technician

Exhaust Aftertreatment Fuel Pressure Sensor Circuit Low

What does that mean?

This diagnostic trouble code (DTC) is a generic powertrain code and applies to many OBD-II vehicles (1996-newer). That may include but is not limited to vehicles from Mercedes Benz, Mitsubishi, etc. Although generic, the exact repair steps may vary depending on year, make, model and powertrain configuration.


 

A stored a code P20DF in your diesel powered vehicle means that the powertrain control module (PCM) has detected insufficient voltage in the fuel pressure sensor circuit for the exhaust aftertreatment system.

总裁俱乐部appThe exhaust aftertreatment system (also called selective catalyst reduction system) is used to enhance the capabilities of the exhaust catalyst system. It may consist of one or more of these items; diesel oxidation catalyst, diesel particulate filter, reductant injection system, ammonia slip catalyst, and a nitrogen oxide (NOx) trap.

The reductant injection system is typically composed of at least one reductant injector, a reductant fuel storage tank, and high-pressure reductant fuel lines. A high-pressure, electronic pump is normally situated in the tank or in the fuel supply line. An EAS fuel pressure sensor allows the controller to monitor system pressure when the supply pump is activated. It is within this circuit that a malfunction has been perceived when a code P20DF is stored.

Among other things, exhaust aftertreatment systems (EAS) are responsible for the injection of reductant compound/diesel exhaust fluid (DEF) into the exhaust in front of the diesel particulate filter, NOx trap, and/or the catalytic converter via an automated fluid storage and injection system. Precisely timed DEF injections elevate the temperature of the various filtration elements and allow them to perform more efficiently. Introducing DEF into the catalyst system promotes filtration element longevity and allows fewer harmful exhaust emissions to be released into the atmosphere.

The EAS and catalyst systems are monitored and controlled by either the PCM or a stand-alone controller (which interacts with the PCM). The controller monitors the reductant fluid injection system pressure, O2, NOx, and exhaust temperature sensors (as well as other inputs) to determine the appropriate time for DEF (reductant) injection.

总裁俱乐部appIf the PCM detects insufficient voltage on the circuit for the EAS fuel pressure sensor, a code P20DF will be stored and a malfunction indicator lamp may be illuminated.


P20DF

What is the severity of this DTC?

A stored code P20DF should be considered severe and addressed as quickly as possible. The EAS system may be damaged as a result of the conditions which contributed to the code P20DF being stored.

What are some of the symptoms of the code?

Symptoms of a P20DF trouble code may include:

What are some of the common causes of the code?

总裁俱乐部appCauses for this code may include:

What are some P20DF troubleshooting steps?

总裁俱乐部appA diagnostic scanner, a digital volt/ohmmeter (DVOM), and a source of vehicle specific diagnostic information will be required to diagnose a code P20DF.

总裁俱乐部appLocating a technical service bulletin (TSB) that matches the vehicle year, make, and model; as well as the engine size, code/s stored, and symptoms exhibited, could yield helpful diagnostic information.

I like to begin my diagnosis with a visual inspection of the EAS wiring harnesses and connectors. Burnt or damaged wiring and or connectors should be repaired or replaced before proceeding.

总裁俱乐部appI would continue by plugging the scanner into the vehicle diagnostic connector and retrieving all stored codes and pertinent freeze frame data. Consider writing this information down before clearing the codes. Test drive the vehicle until the PCM either enters readiness mode or the code is reset.

If the PCM enters readiness mode at this time, the code is intermittent and may be much more difficult to diagnose If this is the case, the conditions which contributed to the code being stored may need to worsen before an accurate diagnosis can be made.

总裁俱乐部appIf the code is immediately reset, completing the next step of your diagnosis will require that you search your vehicle information source to obtain diagnostic flow charts, connector pin-out charts, connector face views, as well as component testing procedures and specifications.

Use the DVOM to test (voltage drop) on all EAS fuel supply system grounds. Continue by testing the power supply to the EAS control system. Test fuses with the circuit loaded to avoid misdiagnosis.

If all system fuses are intact, use the DVOM to test the EAS fuel pressure sensor and sensor circuits. If any of these components fails to meet manufacturer’s specifications, suspect that it has failed.

Related DTC Discussions

Need more help with a P20DF code?

If you still need help regarding the P20DF trouble code, please post your question in our FREE car repair forums.

NOTE: This information is presented for information purposes only. It is not intended as repair advice and we are not responsible for any actions you take on any vehicle. All information on this site is copyright protected.

手机棋牌输了几百万 我爱彩票邀请码是多少 怎么购买手机赌博软件 怎么样进入赌单双软件 快钱彩票官网 怎么下载波克棋牌 手机版彩票过滤工具 快乐棋牌游戏 我想查查彩票开奖结果 怎样买世界杯足球彩票